城市小区规划对大气环境影响的评估研究   总被引：5，自引：3，他引：5  

苗世光  王晓云  蒋维楣  奚文  季崇萍  刘凤辉  陈鲜艳 《高原气象》2007,26(1):92-97

不同城市小区规划方案对大气环境的影响不同。本文在已建城市小区尺度气象和污染扩散模式的基础上,针对城市小区规划对气象及大气环境的影响,提出了一套以人为本的客观、科学、可操作的影响评估指标及方法,并以北京市某小区两种规划方案为例,具体评估了它们对气象及大气环境的不同影响。结果表明:由于第二种规划方案在小区中部有一条较宽的东西向道路,并且道路中绿化较多,这条道路是气流东西向流动的重要通道,道路附近风速较大、气温较低、污染较轻,并且对整个小区的气象和大气环境都有改善。由此可见,基于城市小区尺度模式,对城市小区规划对大气环境的影响进行评估是必要和可行的。本文提出的人体舒适度、行人舒适度、地面污染物浓度、最高建筑高度以下污染物浓度、建筑物表面污染物浓度及扩散能力等六项评估指标,并分别给予该6种指标的权重系数为0.2,0.1,0.1,0.1,0.1及0.4,然后再加权平均的评估方法是合理可行的。  相似文献   

Comparison of TL multiple aliquot, single grain GLSL SAR and C-14 ages for the Puritjarra, Australia, rock shelter     

J.R. Prescott  F.M. Williams  C.D. Hunt 《Quaternary Geochronology》2007,2(1-4):344-349

We report single-grain quartz luminescence ages for the Puritjarra rock shelter, with the aim of resolving an apparent discrepancy between ages obtained by ¹⁴C and a variety of luminescence methods, previously reported. Ages now found at all depths to 75 cm (ages to 30 ka) can be interpreted as largely resolving the differences. This implied caveat arises because single-grain methods are statistically inefficient. As a consequence, a degree of interpretation is inevitable in analysing the data. The emphasis in the present paper is an analysis making use of weighted histograms. The measurements by single grain OSL and ¹⁴C, including ABOX–SC, taken together, can be regarded as compatible. They indicate human occupation of the Puritjarra rock shelter at least as early as 30 ka BP.  相似文献   

Remotely sensed estimation of forest canopy density: A comparison of the performance of four methods     

Chudamani Joshi  Jan De Leeuw  Andrew K. Skidmore  Iris C. van Duren  Henk van Oosten 《International Journal of Applied Earth Observation and Geoinformation》2006

In recent years, a number of alternative methods have been proposed to predict forest canopy density from remotely sensed data. To date, however, it remains difficult to decide which method to use, since their relative performance has never been evaluated. In this study the performance of: (1) an artificial neural network, (2) a multiple linear regression, (3) the forest canopy density mapper and (4) a maximum likelihood classification method was compared for prediction of forest canopy density using a Landsat ETM+ image. Comparison of confusion matrices revealed that the regression model performed significantly worse than the three other methods. These results were based on a z-test for comparison of weighted kappa statistics, which is an appropriate statistic for analysis of ranked categories. About 89% of the variance of the observed canopy density was explained by the artificial neural networks, which outperformed the other three methods in this respect. Moreover, the artificial neural networks gave an unbiased prediction, while other methods systematically under or over predicted forest canopy density. The choice of biased method could have a high impact on canopy density inventories.  相似文献   

A GIS Analysis to Evaluate Areas Suitable for Crushed Stone Aggregate Quarries in New England,USA     

Robinson  Gilpin R.  Kapo  Katherine E.  Raines  Gary L. 《Natural Resources Research》2004,13(3):143-159

Aggregate is a low unit-value mineral commodity. Costs to move aggregate from the mine site to the point of use is a large fraction of the resource cost to users. Production sites for aggregate occur where suitable source materials exist and where transportation and market conditions are favorable. The increasing demand for aggregate and the difficulty of developing and permitting new sites and of renewal of permits on existing sites of aggregate production indicates that aggregate will be supplied from sources yet to be developed or delineated in many areas. Site development and permitting for aggregate production is difficult because many land management plans and zoning actions fail to anticipate prospective source areas for aggregate in a way that is consistent with both the source rock quality and the transportation and socioeconomic factors that define the economic viability of the industry. Spatial analysis provides a method to integrate both geology and economic (transportation and marketplace) parameters in a regional model. Weights of evidence (WofE) analysis has been used to measure the spatial correlation of geologic map, transportation network, and population data with current production sites for crushed stone aggregate in the New England region of the northeastern United States. Weighted logistic regression (WLR) is used with the WofE results to rank areas in terms of their relative suitability for production of crushed stone. Spatial analysis indicates that 85% of the 106 crushed stone aggregate quarries in New England are sited within 1.6 km (1 mile) of either a principal highway or rail line in the region. Seventy-eight percent of crushed stone aggregate quarries are sited in census tracts with population densities exceeding 100 people/mile². These relations illustrate the importance of proximity to both transportation corridors and developing areas where aggregate is predominately used. Only one active crushed stone quarry is located in a census tract with a population density less than 15 people/mile², reflecting the lack of sufficient market demand in many rural areas to develop an operation there. However, since 1990, almost all new quarries have been developed in census tracts with population densities less than 200 people/mile², indicating the difficulty of permitting new quarry sites in highly populated areas. Crushed stone aggregate is produced predominately from three hard rock types that are distributed widely in New England; 28% of sites use granitic rock, 25% use carbonate rocks, and 25% use mafic rock types that are categorized as trap rock by the aggregate industry. The other crushed stone aggregate sources include a variety of fine-grained metamorphic rock types. Carbonate rocks and Jurassic basalt (the primary trap rock source) are the most prevalent source rocks on an area-weighted basis. Spatial analysis can be used on a regional scale to rank areas by their relative suitabilityfor crushed stone aggregate production based on geology, transportation, and population parameters. The results of this regional analysis can identify areas for more detailed evaluation. As transportation or population features change, the model can be revised easily to reflect these changes.  相似文献   

GPS水汽遥感中的大气加权平均温度的变化特征及局地算式研究   总被引：16，自引：4，他引：16       下载免费PDF全文

谷晓平  王长耀  吴登秀 《气象科学》2005,25(1):79-83

根据广东清远1996～2001的气象探空资料，计算了大气加权平均温度，在此资料基础上，利用最优子集回归建立了GPS水汽遥感中的大气加权平均温度局地算式，该算式的精度优于目前广泛使用的Bevis算式。  相似文献   

Histogram and variogram inference in the multigaussian model   总被引：1，自引：4，他引：1  

Xavier Emery  Julián M. Ortiz 《Stochastic Environmental Research and Risk Assessment (SERRA)》2005,19(1):48-58

Several iterative algorithms are proposed to improve the histogram and variogram inference in the framework of the multigaussian model. The starting point is the variogram obtained after a traditional normal score transform. The subsequent step consists in simulating many sets of gaussian values with this variogram at the data locations, so that the ranking of the original values is honored. The expected gaussian transformation and the expected variogram are computed by an averaging operation over the simulated datasets. The variogram model is then updated and the procedure is repeated until convergence. Such an iterative algorithm can adapt to the case of tied data and despike the histogram. Two additional issues are also examined, referred to the modeling of the empirical transformation function and to the optimal pair weighting when computing the sample variogram.  相似文献   

Improvement of spatial interpolation accuracy of daily maximum air temperature in urban areas using a stacking ensemble technique     

Dongjin Cho  Cheolhee Yoo  Yeonsu Lee  Jaese Lee 《地理信息系统科学与遥感》2020,57(5):633-649

ABSTRACT

The reliable and robust monitoring of air temperature distribution is essential for urban thermal environmental analysis. In this study, a stacking ensemble model consisting of multi-linear regression (MLR), support vector regression (SVR), and random forest (RF) optimized by the SVR is proposed to interpolate the daily maximum air temperature (T_max) during summertime in a mega urban area. A total of 10 geographic variables, including the clear-sky averaged land surface temperature and the normalized difference vegetation index, were used as input variables. The stacking model was compared to Cokriging, three individual data-driven methods, and a simple average ensemble model, all through leave-one-station-out cross validation. The stacking model showed the best performance by improving the generalizability of the individual models and mitigating the sensitivity to the extreme daily T_max. This study demonstrates that the stacking ensemble method can improve the accuracy of spatial interpolation of environmental variables in various research fields.  相似文献   

Development of a diatom-based specific conductivity model for the glacio-isostatic lakes of Truelove Lowland: implications for paleoconductivity and paleoenvironmental reconstructions in Devon Island lakes, N.W.T., Canada     

Sai L. Ng  Roger H. King 《Journal of Paleolimnology》1999,22(4):367-382

Diatoms are identified and enumerated from the surface sediments of 100 lakes of Truelove Lowland, Devon Island, N.W.T., Canada. These lakes range from large oligotrophic lakes, to small tundra ponds, to coastal marine lagoons which are diverse in terms of ionic concentration and composition. The relationship between diatoms and 15 limnological variables is examined using Canonical Correspondence Analysis (CCA). Specific conductivity is identified as the most important variable influencing the distribution of diatoms in the Truelove lakes. A Weighted Averaging (WA) calibration model is developed to predict diatom-inferred specific conductivity. The reliability of the model is tested by evaluating the correlation between observed and diatom-inferred values and determining the error of prediction by bootstrapping. The applicability of the predictive conductivity equation is demonstrated by reconstructing the paleoconductivity history of Fish Lake.  相似文献   

Computational fluid dynamics modeling of abutment scour under steady current using the level set method     

《国际泥沙研究》2020,35(4):355-364

The scour and deposition pattern around an abutment under constant discharge condition is calculated using a three dimensional (3D) Computational Fluid Dynamics (CFD) model. The Reynolds-Averaged Navier Stokes (RANS) equations are solved in three dimensions using a CFD model. The Level Set Method (LSM) is used for calculation of both free surface and bed topography. The two-equation turbulence model (k-ε and k-ω) is used to calculate the eddy viscosity in the RANS equations. The pressure term in the RANS equations on a staggered grid is modeled using the Chorin's projection method. The 5th order Weighted Essentially Non-Oscillatory (WENO) scheme discretizes the convective term of the RANS equations. The Kovacs and Parker and Dey formulations are used for the reduction in bed shear stress on the sloping bed. The model also used the sandslide algorithm which limits bed shear stress reduction during the erosion process. The numerical model solution is validated against experimental results collected at the Politecnico di Milano, Milan, Italy. Further, the numerical model is tested for performance by varying the grid sizes and key parameters like the space and time discretization schemes. The effect of varying bed porosity has been evaluated. Overall, the free surface is well represented in a realistic manner and bed topography is well predicted using the Level Set Method (LSM).  相似文献   

加权最小范数平差的伪观测解法     

薛泮成  王春赋 《测绘工程》1997,6(4):25-29

首先证明了加权最小范数平差一般解的一个重要性质，由此提出了利用附加的观测值来求解加权最小范数平差问题的方法，并证明了该法与利用一般解法等价性的充要条件。  相似文献